Union Binding Multi Tool Black / Orange

The Union Binding Multi Tool Black / Orange is a compact driver for snowboard binding adjustments. It brings the useful bit profiles into one small tool that can travel with your riding equipment. Choose it for checking hardware, making a considered stance adjustment or dealing with a loose fastener before the next run. The black and orange design makes it easy to recognise among other small items in a repair pouch.

The ratcheting driver lets you turn a screw through repeated movements without fully repositioning the handle after each movement. That is useful around a binding, where access and hand position can be limited. Set the mechanism for the direction you need and keep the bit aligned with the screw. A clean fit between tool and fastener matters more than speed, especially when the hardware has already seen several seasons of adjustment.

Union supplies six bit profiles: Phillips #3, Phillips #2, Torx T25, Hex 4, Hex 5 and flathead. Select the profile that properly fills the screw head. Similar-looking crosshead or hex fittings can have different sizes, so compare the engagement before applying pressure. Having the selection together is useful when a setup combines mounting screws with smaller hardware elsewhere on the binding. Check the equipment instructions for the appropriate tool at each connection.

The tool is custom made by Union and designed for adjustments on the mountain as well as preparing equipment at home. Its compact format fits into a suitable pocket or pack, while the bit storage keeps the working tips together. Make sure the tool and bits are secured before riding. Carrying a tool is useful only if the right bit is still with it when you need to make an adjustment.

For a setup change, place the board somewhere stable and note your existing stance width and binding angles before loosening anything. Make one deliberate change, then check the complete mounting connection according to the binding and board instructions. Use the specified tightening procedure and an appropriate torque tool when the equipment requires a measured setting. After use, clear snow and moisture from the driver and bits, then allow them to dry before storage. Inspect screw heads before reusing them; damaged hardware is better replaced than worked repeatedly with an ill-fitting tip. Keep the tool with compatible spare screws and other parts from our Union range so small maintenance jobs remain organised.

• Product: Union Binding Multi Tool; black/orange; 18010300-BLO-000.
• Mechanism: compact ratcheting driver with bit storage.
• Bits: Phillips #3 and #2; Torx T25; Hex 4 and 5; flathead.
• Included: one multi-tool with the listed bit selection.
• Use: matching binding fasteners and general equipment adjustments.